Fretting-Wear Damage: A Summary of Recent Findings

Abstract

Flow-induced vibration of steam generator (SG) tubes may sometimes result in fretting-wear damage at the tube-to-support locations. Fretting-wear damage predictions are largely based on experimental data obtained at representative test conditions. Fretting-wear of steam generator materials has been studied at the Chalk River Laboratories for two decades. Tests are conducted in fretting-wear test machines that simulate steam generator environmental conditions and tube- to-support dynamic interactions. A new high-temperature force and displacement measuring system was developed to monitor tube- to-supp ort interaction (i. e., w ork-rate) at operating conditions. This improvement in experimental fretting-wear technology was used to perform a comprehensive study of the effect of various environment and design parameters on steam generator tube wear damage. This paper summarizes the results of tests performed over the past four years to study the effect of temperature. water chemistry, support geometry, and tube material on fretting-wear. The results show a significant effect of temperature on tube wear damage. Therefore fretting- wear tests must be performed at operating temperatures in order to be relevant. No significant effect of the type of water treatment on tube wear damage was observed. For predominantly impacting motion, the wear of steam generator tubes in contact with 41 0 stainless steel is similar regardless of whether Alloy 690 or Alloy 800 is used as tubing material or whether lattice bars or broached hole supports are used. Based on results presented in this paper, an average wear coefficient value is recommended that is used for the prediction of SG tube wear depth versus time.